disclaimer: Pemf generator machines are not a medical device in the US. Pemf machines are not intended to treat or diagnose any disease or condition nor be a preventative tool to treat any disease or condition. I was told to put up this disclaimer. This site is for entertainment purposes only. For education please consult with your doctor. Please look at my site as a diary of mine. It is my own research and I do not claim anything as fact. Everything is either my opinion or based on my reviews. For any claims, I make no claims at all. I am not a doctor.  In the United States Pemf machines have not been FDA approved as medical devices. 
Website Designed by ©
...because every company said they had the best PEMF machine

Ask for Sharon
1-877 573-4647

Ask for Jake
1-877 573-4647

Mag mat? QRS mat? OMI mat? Bee mer mat
Compare all the different PEMF Mats on our new page.
Pemf mat review page
I have found that the easiest way to conceptualize the Pemf industry is by breaking it down into a tiered rating system. 

About 90% of customers end up purchasing a Pemf machine from Tier 2 level. The rest choose a Tier 1 or Tier 3. Tier 2 is composed of companies that use very confusing marketing for their brands. The reason is because 90% of those brands in this tier are actually “Re-brands” coming from the same few manufacturers in China. So these brands are almost identical to one another and so each company just makes up claims and marketing hype to appear different than their competition. 

For this reason I have divided up Tier 2 into two sub levels, A and B. The lower the tier the more drawbacks it has versus benefits. So Tier 2B would have maybe a limited warranty for example versus a Brand from Tier 2A.

Rating System based off the following:
Warranty, Standard vs Solid state components, How Clean the materials (off gassing chemicals), Power rating/fluence rating of the coils for electrical output, Generation of Pemf, EMF level, Cold Spots, Deliverance of joule in nanoseconds, and Customer Service. If you want specific information on each brand and how it rates on each of these categories please ask. 

Tier 1:
A -- QRS, Sentient Light Element, Delta Pulse (These have the most intense fluence, lowest electro-smog, and frequency range).
B --AMPCOIL, Magmat, Magnawave, Pulse Centers
Tier 2:
A --Magnapulse, PEMF 8000
B --PER 2000, E Pulse Magnetics

Tier 3:
Maggie, OMI Mat, 
(90% of PEMF machines are re-brands from same four manufacturers in China and most machines fall into this Tier)

NOTE: I tell people 98% of the health benefits of being in a Pemf are not related to a high powered machine.

I am of course happy to consult with you by phone, email, or text to help find the best brand and model for your unique set of needs. Please look to us to be the one stop solution to figuring out how to choose the right Pemf machine without getting a headache in the process.

Please know that we always seek to have the best sale price out there.
Speak soon, Jake
Pemf mat Wisdom - stuff they didn’t tell me

​So this is the page that everyone has been wanting me to write. Everyone is scared to talk about these things, like what happens if there is too much micro circulation, what happens if there is too much lipolysis, what happens if the gauss level is too high and what level will kill off the weak cells and strong enough to raise the folate of the cells that are healthy. This is the main side effect that people try to stay away from. But, if used on a lower level based on someone's starting voltage it can be just fine. It all depends on the person. I never turn my mat over 2.5mg. Anything over 2.5mg according to the World Health Organization 

EMFs are measured in milliGauss (mG). The Environmental Protection Agency recommends that you limit your exposure to 0.5 mG to 2.5 mG. When you are three feet away from a microwave, you are exposed to up to 25 mG.
(That was taken directly off their site word for word)

With the pemf mats, most people use it in the beginning under this level but most people don't know what the level is that exceeds the safe level.

Some people buy 2 mats for their use, either 2 put one on top of them and one under them so they can turn it down in half. Many people buy 2 mats not just to get double fluence from top and bottom but put 2 mats out on the floor or bed side by side to get more coverage. In some instances this is something I would recommend. For others, I would never recommend this. Also, depending on the resonant effect of a mat, some companies only have half body mats and these have extreme resonant effects.

Here is a picture of a half body pemf mat that came out as the first solid state pemf mat, (My original came out nearly 20 years before this one. The QRS mat was the original. Each mat has it's own pros and cons which I can go over them for those who want to review them).

I wrap my Vital Organs - My Pemf Mat Vital organ Wrap

Side Sleepers - Get a double mat
I show how many people get only half the benefit of the pemf mat when their arms are off the mat and legs are off. 80% of the lymph vessels are in the legs. Unless using it for the resonant effects, there is no need to use a double mat.

Double Mats on bottom -
Many people use a pemf mat on the bottom and on top of them. But, having 2 on the bottom gives more fluence if just focusing on one part of the body. Most people do not talk about this as the recommendations are for keeping the body from having any type of detox reactions. That’s why most people say level 1 to start with. I do lymphatic exercise and can stay on longer. The recommended settings based on my research are just strong enough to avoid Herxheimer reactions. Most people aren’t heating up their core 2 to 3 degrees before going on it or draining their lymph like they should.

Side to Side pemf mats - Many people are positional intolerant and cannot just lay flat with their legs strait and arms tucked into their sides. Many people have 2 mats side to side so their is more coverage so they can lay on their side with their arms and legs more spread out. In my video I show how when using the mat on the sleep setting when I wake up I am half off the mat until I had 2 mats.

Is a pemf mat better on top or below you? So many people lay on it and turn it to level 10 to treat deeper into the body. The frequencies the higher it is turned on is just amplified and can get distorted the more energy that is put into it. The resonant effect diminishes the higher the intensity. So many people turn it up past level 3 and don't really know how to use their pemf mat. When using it on level 3 which I rarely recommend anyone going over I keep it on top of me nearly every time I use it if doing the 8 minute sessions. If anyone really has a need to go over that, then having more fluence I believe is more important than intensifying the frequencies just to get them to go deeper. It is not more frequencies, the length just increases. It's like having having tiny sine waves vs large sine waves.Doubling the sine waves is not the same thing as doubling the size of the sine wave.

Using it at Level 10 - 
Beware of trying to raise the voltage of the healthy cells but at the same time wanting to preserve the weaker cells. High EMF can lower the weak cells but trying to not kill the cells just to strengthen the cells that are gaining voltage. Those weak cells that have a slight chance of surviving based on what I have researched should not be on used on the high mat settings. This is why instead of putting it on level 6 I use two mats on level 3, one on top and one under. For just a few hundred dollars more to get a 2nd mat makes a night and day difference in electrosmog.

ZPE pemf mat - I put zpe stickers on the bottom of my controller and the mat itself. I have one sticker under the bottom near the foot and one near the top. Those who haven’t experienced the zpe sticker and have only been using the pemf mat without the stickers will be in for a surprise after a session with the sticker. Having carrier wave pick up the frequencies from the sticker is a game changer. Those who are sensitive to energy should be able to know when the sticker is under the mat or not. (I have over 400 videos showing these stickers going to health and wellness expos and have them all up on youtube.

Never sleep on mat:
Many people who want to keep it on the lower levels to avoid high emf prefer to treat their vital organs instead of laying on their back. Many people turn the power to level 6 to 10 so the magnetic field reaches above their body when laying flat. Most people that I talk to always lay on their back and have to set the settings up high to reach their whole body. I like to use 2 mats, one on top of me and one under me to avoid having to turn the power level up. The higher the level the more EMF which I try to avoid along with distorting the frequencies at very high levels depending on which mat. The back muscles can block most of the field that many people want to reach their vital organs.

Ripple and AC current is what I try to avoid at all costs. When it is not plugged in it is working on DC current instead of AC current so the ripple is avoided and the 50/60 hertz that I try to avoid. Those that want to keep it plugged in all night should use a mat that has zero EMF or has a built in controller that is shielded so there is no EMF.

Level 3 PEMF - I never use it over level 3
This is at the level of the frequencies closest to the Earth. Over that when the gauss levels get high the waves can get distorted but the positive thing is that they can go deeper in the body. Another reason why I don’t turn my pemf mat to level 6 and instead buy a 2nd mat for about 500 dollars and turn both to level 3. Level 3 is the closest to 7.3 hertz.

Level 4 to 10: ONLY and only when I am in pain I turn it up this high but not the mat. Note: I do not recommend for sick people to use it over level 1. I do not recommend going over this level unless doing it for a week. Overdoing it can make certain people sick. Most people are releasing but not removing the wastes and they don’t even realize it.

Pemf Mats on the bed: Yes, most people do it but

Rather than turning the mat up high and getting a higher EMF, I keep the mat at intensity 3 and wrap it around my body. Many people do a double session for the lower and upper body. Remember, if not doing lipolysis I see no need to do the legs unless there is a specific reason that is off label.
We put these on 5 dollar laser pens and it turns a laser pen into a ZPE laser. So many people trash talk these pens until they see proof that it works. 
Once people realize why I would never use a pemf at plugged in I doubt people would use it plugged in after knowing the truth. 

I take my pemf to the park and let people try it. The battery lasts all day. I only use the plug in type if it shields the incoherent EMF 
It is possible to sleep on the mat but those who toss and turn at night can accidentally bend the coils. There are other Pemf mats I recommend for those that are going to be using it on the bed instead of having to preserve the mat on a hard wood floor. The copper coils are about the size of the sunglasses in the picture I took.
Comfort: those that are going to use this on a hard floor or firm chair won't have a problem. But, if sleeping on a bed and the person's weight is on the coil it might not feel good when your shoulder or hip is digging into the coil at night. These are made to be used on a hard surface.
If sleeping on the mat or using it on the bed and if over time the wire starts pulling due to the weight, they can be fixed or a new mat can be bought. I urge people that are going to use it in the bed to consider this. The mats that are able to be used in the bed are the metal mesh mats that are not based on coils like this type.

I can help those who are looking to get the right Pemf mat. Those that are looking for something to deal with inflamed or painful areas who are dealing with more serious issues like broken blood vessels and are in the healing state and not the degenerate state may want a solid state type mat. There is only one solid state type that I recommend for those that aren't just only looking for micro circulation or lymphatic drainage. Below is a picture of the solid state mat. It goes up to 545 Gauss and is a half body mat. This is probably the highest end solid state mat I have used. The controller is 100% solid state and doesn't have the older spark gap. This is not the type of mat to sleep on. It is used for doing short treatments. Those looking for micro circulation and using it long term may not want this type. This is more the type that someone rents for a few months until they don't need it anymore unlike the mats that people use every day. 

I only recommend this mat for temporary use. Many people rent this mat who don't want to buy it. Most people who use this mat use it for about 2 months who are in the healing state and then return it and buy a long term mat. For those who end up buying a long term mat I will refund the rental fees and apply it to the mat that you buy from me. 

Yes, I reviewed the OMI mat. I reviewed the MAS mat (pictured on the top left). I know which ones have the highest gauss which often comes with very high EMF unless the pemf mat is shielded against harmful EMF. (I have a picture below that shows how when brands that go up to really high gauss get distorted. (Again, I only use my Pemf mat on Level 3 and never over that. The Curatron and the Magmat have super high gauss. The Magmat uses a solid state controller and is the most powerful pemf mat on the market (545 Gauss). The QRS mat has .4 Gauss. For those looking for more of an electrical therapy vs a frequency therapy that will be a deciding factor in which pemf mat to get. The Magmat is a serious mat. Many veterinarians use it on horses and chiropractors use it for those who are not just looking for microcirculation. The Magmat is not something that should be used like the other mats that people sleep on like the QRS 101 mat. I sleep on my QRS mat every single night. I have an OURA ring that tells me how I am sleeping, down to my breath rate and REM sleep. My REM sleep time goes way down if I don't use my mat on the Relax mode before sleeping. This is the only mat that is comfortable for me to sleep on. It has a metal matrix instead of copper coils.

I urge everyone to get one of these Oura rings. For those buying mats that have frequencies that are distorted vs higher quality pemf mats that do not distort their wavelengths, this is one of the coolest things I have found to tell me how I am doing. I have several cases of these and will throw one of these in with any Pemf mat purchase. Let me know if you want one of these with your mat.
There are many companies that pop up usually around the holiday times and import several hundred pemf mats (I have been on Alibaba and there are so many deals where people can import mats for 300 bucks and with a minimum of 50 mats and they are marked up to 3000 dollars. There is not research or anything on these mats. I bought many of these non branded mats as well as the popular brands and some of them according to the meter give nothing but distorted waves. My pemf mat and 2 other brands that have been around since the 90s have tweaked their machines to almost perfection. 

This is an example of a distorted wavelength. I urge people to really know the machine they are buying and for those that plan on using their mats on level 10, or really high levels, to make sure their mats don't distort. These machines cost around 200 to 300 dollars new. You can go on eBay and buy used ones for less than 75 bucks. The meters don't lie. I do not promote machines that give distorted frequencies. The really cheap brands that come up that I have never heard of usually give these types of waves. It is not fair to the consumer to buy machines that have not been tested. Most people don't know how to really compare mats before buying. I hope my site gives enough information so people buy the right pemf mat the first time.
...because every company said they had the best PEMF machine

Ask for Sharon
1-877 573-4647

Ask for Jake
1-877 573-4647

See our Latest Pemf Mat Review Site

Our latest site on pemf mats.
OMI MAT - E Pulse - MAGMAT - QRS Mat - Magna Wave Maxx - InfraPemf Pro - MAGNAPULSE - AMPCOIL - Sentient Element Light